Compaq Portable 286 Compaq Portable Computer, Compaq Plus Personal Computer, a - Page 71
COMPAQ PORTABLE 286 Fan/Bracket Assembly Removal and Replacement
View all Compaq Portable 286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
5. Slide the fuse box back into place. Press the cover until you feel it snap into place. COMPAQ PORTABLE 286 Fan/Bracket Assembly Removal and Replacement To remove the fan/bracket assembly: 1. Complete the High Voltage Access Plate Removal procedure (see Section 7.5). 2. Open the access door panel. 3. Loosen (DO NOT REMOVE) the screw that secures the fan/bracket assembly to the chassis (at the rear of the monitor). 4. Now remove the remaining three screws that secure the fan/bracket assembly in place (Figure 7.8-16). 5. Disconnect the fan/bracket assembly power connector from the power supply assembly (Figure 7.8-17). Cut the tie wrap that holds the fan power cord to the monitor enclosure.
5. Slide the fuse box back into place. Press the cover until you feel it
snap into place.
COMPAQ PORTABLE 286 Fan/Bracket Assembly Removal and Replacement
To remove the fan/bracket assembly:
1. Complete the High Voltage Access Plate Removal procedure (see
Section 7.5).
2. Open the access door panel.
3. Loosen (DO NOT REMOVE) the screw that secures the fan/bracket assembly to
the chassis (at the rear of the monitor).
4. Now remove the remaining three screws that secure the fan/bracket assembly
in place (Figure 7.8-16).
5. Disconnect the fan/bracket assembly power connector from the power supply
assembly (Figure 7.8-17). Cut the tie wrap that holds the fan power cord
to the monitor enclosure.