Compaq Portable 286 Compaq Portable Computer, Compaq Plus Personal Computer, a - Page 66
Complete the High Voltage Access Plate Removal Procedure
View all Compaq Portable 286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
releases the power supply assembly from the chassis. 7. Carefully lift the power supply assembly out of the chassis and gently remove all remaining connectors from the board (Figure 7.8-9). To replace the power supply assembly, reverse Steps 1 through 7. NOTE: Be sure to securely tighten the mounting screw with the 5/16 inch box end wrench because using only the socket extension wrench may not securely tighten the mounting screw (thereby causing grounding problems). COMPAQ Portable Fan/Bracket Assembly Removal and Replacement To remove the fan/bracket assembly: 1. Complete the High Voltage Access Plate Removal Procedure (see Section 7.5). 2. Disconnect the fan power connector from the power supply (Figure 7.8-10).
releases the power supply assembly from the chassis.
7. Carefully lift the power supply assembly out of the chassis and gently
remove all remaining connectors from the board (Figure 7.8-9).
To replace the power supply assembly, reverse Steps 1 through 7.
NOTE: Be sure to securely tighten the mounting screw with the 5/16 inch box
end wrench because using only the socket extension wrench may not securely
tighten the mounting screw (thereby causing grounding problems).
COMPAQ Portable Fan/Bracket Assembly Removal and Replacement
To remove the fan/bracket assembly:
1. Complete the High Voltage Access Plate Removal Procedure
(see Section 7.5).
2. Disconnect the fan power connector from the power supply (Figure 7.8-10).