D-Link DES-3350SR Reference Manual - Page 103
local>config stp ports 5-10 state enabled, Success., local>, state [enabled|disabled]
UPC - 790069254499
View all D-Link DES-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config stp ports edge [true|false] - true designates the port as an edge port. Edge ports cannot create loops, however an edge port can lose edge port status if a topology change creates a potential for a loop. An edge port normally should not receive BPDU packets. If a BPDU packet is received it automatically loses edge port status. False indicates the port does not have edge port status. p2p [true|false] - true indicates a point-topoint (p2p) shared link. These are similar to edge ports however they are restricted in that a p2p port must operate in full-duplex. Like edge ports, p2p ports transition to a forwarding state rapidly thus benefiting from RSTP. state [enabled|disabled] − Allows STP to be enabled or disabled for the ports specified in the port list. The default is disabled. Restrictions Only administrator-level users can issue this command. Example Usage: To config STP ports 5 to 10: local>config stp ports 5-10 state enabled Command: config stp ports 5-10 state enabled Success. local> 103