D-Link DES-3350SR Reference Manual - Page 262
the access profile will apply to only, packets with this source MAC address.
UPC - 790069254499
View all D-Link DES-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile to configure an access profile on the switch and to enter specific values that will be combined, using a logical AND operation, with masks entered with the create access_profile command, above. Parameters profile_id − add access_id − Adds an additional rule to the above specified access profile. The value specifies the relative priority of the additional rule. A lower access ID, the higher the priority the rule will be given. ethernet − Specifies that the switch will look only into the layer 2 part of each packet. vlan − Specifies that the access profile will apply to only to this VLAN. source_mac − Specifies that the access profile will apply to only packets with this source MAC address. destination_mac − Specifies that the access profile will apply to only packets with this destination MAC address. 802.1p − Specifies that the access profile will apply only to packets with this 802.1p priority value. ethernet_type − Specifies that the access profile will apply only to packets with this hexidecimal 802.1Q Ethernet type value 262