D-Link DES-3350SR Reference Manual - Page 49

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ports [auto|10_half|10_full|100_half|100_full| 1000_half|1000_full] state [enabled|disabled]} Description This command allows for the configuration of the switch's Ethernet ports. Only the ports listed in the will be affected. Parameters all − Displays all ports on the switch to be configured. portlist − Specifies a range of ports to be configured. The port list is specified by listing the beginning port number and the highest port number of the range. The beginning and end of the port list range are separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports between port 3 and port 4 − in numerical order. auto − Enables auto-negotiation for the specified range of ports. [10|100|1000] − Configures the speed in Mbps for the specified range of ports. [half|full] − Configures the specified range of ports as either full- or half-duplex. state [enabled|disabled] − Enables or disables the specified range of ports. Restrictions Only administrator-level users can issue this command. 49