D-Link DES-3350SR Reference Manual - Page 344
config ospf ipif, election of the Designated Router DR.
UPC - 790069254499
View all D-Link DES-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf ipif Purpose Used to configure the OSPF interface settings. Syntax config ospf [ipif /all {area |priority |hello_interval |dead_interval |authentication [none|simple |md5 ]|metric |state [enabled|disabled]} Description This command is used to configure the OSPF interface settings. Parameters − The name of the IP interface. priority − The priority used in the election of the Designated Router (DR). A number between 0 and 255. metric − The interface metric (1 to 65535). Entering a 0 will allow automatic calculation of the metric. hello_interval − Allows the specification of the interval between the transmission of OSPF Hello packets, in seconds. Between 1 and 65535 seconds can be specified. The Hello Interval, Dead Interval, Authorization Type, and Authorization Key should be the same for all routers on the same network. dead_interval − Allows the specification of the length of time between 344