D-Link DES-3350SR Reference Manual - Page 70
show snmp host, enable rmon, parameter is specified, all SNMP hosts will
UPC - 790069254499
View all D-Link DES-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show snmp host Description This show snmp host command displays the recipient for which the traps are targeted. Parameters - The IP address of the recipient for which the traps are targeted. If no parameter is specified, all SNMP hosts will be displayed. Restrictions Only administrator-level users can issue this command. Example Usage: To display an SNMP engine on the switch: local>show snmp host Command: show snmp host SNMP Host Table Host IP Address SNMP Version Community Name / SNMPv3 User Name 10.48.76.100 V3 noauthnopriv initial 10.51.17.1 V2c public Total Entries : 2 local> enable rmon Purpose Used to enable RMON on the switch. 70
DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
70
show snmp host
Description
This show snmp host command displays
the recipient for which the traps are
targeted.
Parameters
<ipaddr> – The IP address of the recipient
for which the traps are targeted. If no
parameter is specified, all SNMP hosts will
be displayed.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To display an SNMP engine on the switch:
local>show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address
SNMP Version
Community Name / SNMPv3
User Name
-----------------------
----------------------
-----------------------------------------------------------
10.48.76.100
V3 noauthnopriv
initial
10.51.17.1
V2c
public
Total Entries :
2
local>
enable rmon
Purpose
Used to enable RMON on the switch.