D-Link DES-3350SR Reference Manual - Page 265
local>config access_profile profile_id 1 add access_id 1 ip, source_ip 10.42.73.1
UPC - 790069254499
View all D-Link DES-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile Restrictions priority − Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header. replace_priority − This parameter is specified if you want to change the 802.1p user priority of a packet that meets the specified criteria. Otherwise, a packet will have its incoming 802.1p user priority rewritten to its original value before being transmitted from the switch. replace_dscp − Allows you to specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet. delete − Specifies that the access ID of a rule you want to delete. Only administrator-level users can issue this command. Example Usage: To configure the access profile with the profile ID of 1 to filter frames that have IP addresses in the range between 10.42.73.0 to 10.42.73.255: local>config access_profile profile_id 1 add access_id 1 ip source_ip 10.42.73.1 Command: config access_profile profile_id 1 add access_id 1 ip source_ip 10.42.73.1 265