D-Link DES-3350SR Reference Manual - Page 50
show ports, local>, show ports {<portlist|all>}
UPC - 790069254499
View all D-Link DES-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To configure the speed of port 3 to be 10 Mbps, full duplex, learning and state enabled: local>config ports 1-3 speed 10_full state enabled Command: config ports 1-3 speed 10_full state enabled Success. show ports Purpose Used to display the current configuration of a range of ports. Syntax show ports {} Description This command is used to display the current configuration of a range of ports. Parameters all − Displays all ports on the switch. − Specifies a range of ports to be configured. The port list is specified by listing the beginning port number and the highest port number of the range. The beginning and end of the port list range are separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports between port 3 and port 4 − in numerical order. Restrictions none. 50