D-Link DES-3350SR Reference Manual - Page 136

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1p default_priority settings on the switch. If an untagged packet is received by the switch, the priority configured with this command will be written to the packet's priority field. Syntax config 802.1p default_priority [|all] Description This command allows you to specify default priority handling of untagged packets received by the switch. The priority value entered with this command will be used to determine which of the four hardware priority queues the packet is forwarded to. Parameters − Specifies a range of ports to be configured. The port list is specified by listing the beginning port number and the highest port number of the range. The beginning and end of the port list range are separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports between port 3 and port 4 − in numerical order. all − Specifies that the command applies to all ports on the switch (or in the switch stack). − The priority value you want to assign to untagged packets received by the switch or a range of ports on the switch. Restrictions Only administrator-level users can issue this command. 136