D-Link DES-3350SR Reference Manual - Page 82

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show snmp also displayed. host − This command is used to display the IP addresses and configuration information of remote SNMP managers that are designated as recipients of SNMP traps that are generated by the switch's SNMP agent. − The IP address of a remote SNMP manager that will receive SNMP traps generated by the switch's SNMP agent. user − This command displays information about each SNMP username in the SNMP group username table. view − This command displays an SNMP view previously created on the switch. − An alphanumeric string of up to 32 characters that identifies the SNMP view that will be displayed. Restrictions none. Example Usage: To display SNMP community community strings configured on the switch: local>show snmp community Command: show snmp community 82