D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 163

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 5-44 VLAN Mapping Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Port Original VID List Original Inner VID Action Description Select the Switch unit ID that will be used here. Select the port range that will be used here. Select the port that will be used for the search here. Enter the original VLAN ID list here. The range is from 1 to 4094. Enter the original inner VLAN ID here. The range is from 1 to 4094. Select the action that will be taken here. Options to choose from are Translate and Dot1q-tunnel. • Translate - Specifies that the outer-VID will replace the outer-VID of the matched packets. • Dot1q-tunnel - Specifies that the outer-VID will be added for matched packets. VID Inner VID Priority Enter the VLAN ID here. The range is from 1 to 4094. Enter the inner VLAN ID here. The range is from 1 to 4094. Select the 802.1p priority value here. The range is from 0 to 7. A lower value has a higher priority. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. VLAN Mapping Profile This window is used to display and configure the VLAN mapping profile settings. To view the following window, click L2 Features > VLAN Tunnel > VLAN Mapping Profile, as shown below: 151