D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 97

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description IP DNS Lookup Static State Select to enable or disable the IP DNS lookup static state here. IP DNS Lookup Cache State Select to enable or disable the IP DNS lookup cache state here. IP Domain Lookup Select to enable or disable the IP domain lookup state here. IP Name Server Timeout Enter the maximum time to wait for a response from a specified name server. This value is between 1 and 60 seconds. IP DNS Server Select to globally enable or disable the DNS server feature here. Click the Apply button to accept the changes made. The fields that can be configured in IP Domain Lookup Source Interface are described below: Parameter Source Interface State Interface Type VID Description Select to enable or disable the source interface state here. Select the source interface type here. Options to choose from are Loopback, Mgmt, and VLAN. Enter the VLAN ID of the source interface here. Click the Apply button to accept the changes made. DNS Name Server Settings This window is used to display and configure the IP address of a domain name server. To view the following window, click Management > DNS > DNS Name Server Settings, as shown below: Figure 4-67 DNS Name Server Settings Window The fields that can be configured are described below: Parameter VRF Name Name Server IPv4 Name Server IPv6 Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Select and enter the IPv4 address of the DNS server. Select and enter the IPv6 address of the DNS server. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specified entry. 85