D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 194

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide IGMP Snooping Filter Settings This window is used to display and configure the IGMP snooping filter settings. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Filter Settings, as shown below: Figure 5-74 IGMP Snooping Filter Settings Window The fields that can be configured in IGMP Snooping Rate Limit Settings are described below: Parameter Unit From Port - To Port Limit Number Action VID Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. This is only available if the Port option was selected as the action below. Enter the limit number here. This is to configure the rate of IGMP control packets that the Switch can process on a specific interface. The range is from 1 to 1000 packets per second. Select the No Limit option to remove the limitation. Select the action that will be taken here. Options to choose from are Port and VLAN. Enter the VLAN ID here. This is the Layer 2 VLAN on a trunk port and applies the filter to packets that arrive on that VLAN. The range is from 1 to 4094. This is only available if the VLAN option was selected as the action. Click the Apply button to accept the changes made. The fields that can be configured in IGMP Snooping Limit Settings are described below: 182