D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 576

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 11-5 MPLS LDP Neighbor Targeted Settings Window The fields that can be configured are described below: Parameter Neighbor Targeted Targeted Hello Interval Targeted Hello Hold Time Description Enter the LSR ID of the targeted peer here. The targeted peer is used to establish the LDP session with the non-directly connected neighbor. Enter the interval to the hello message for sessions with extended peers here. The range is from 5 to 65535 seconds. Select the Default option to use the default value. Enter the hold-time of the hello messages for sessions with extended peers here. The range is from 15 to 65535 seconds. Select the Default option to use the default value. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MPLS LDP Neighbor Information This window is used to view and clear the MPLS LDP neighbor information. To view the following window, click MPLS > MPLS LDP Neighbor Information, as shown below: Figure 11-6 MPLS LDP Neighbor Information Window The fields that can be configured are described below: Parameter Peer Description Enter the IP address which is used as the peer LSR ID here. Click the Find button to locate a specific entry based on the information entered. Click the Clear by Peer button to clear the information related to the peer entered. 564