D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 577

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Clear All button to clear all the MPLS LDP neighbor information. MPLS Global Settings This window is used to display and configure the global MPLS settings. To view the following window, click MPLS > MPLS Global Settings, as shown below: Figure 11-7 MPLS Global Settings Window The fields that can be configured for MPLS Global Settings are described below: Parameter MPLS Global State LSP Trap State Description Select to globally enable or disable the MPLS feature here. Select to enable or disable the MPLS LSP trap feature here. Click the Apply button to accept the changes made. The fields that can be configured for MPLS Interface Settings are described below: Parameter Interface VID MPLS State Description Enter the interface VLAN ID that will be used here. The range is from 1 to 4094. Select to enable or disable the MPLS feature for the specified interface here. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MPLS LDP Interface Settings This window is used to display and configure the MPLS LDP interface settings. To view the following window, click MPLS > MPLS LDP Interface Settings, as shown below: 565