D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 296

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter ACL Name Description Enter the standard IP access list name that contains the multicast groups to be mapped. To permit a group, specify 'any' in source address field and specify the group address in destination address field of the access list entry. Alternatively, click the Please Select button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. The fields that can be configured in IGMP SSM Mapping Table are described below: Parameter Group Address Description Enter the IGMP multicast group address here. Click the Find button to locate a specific entry based on the information entered. After clicking the Please Select button, the following page will appear. Figure 6-100 IGMP SSM Mapping Settings (Select) Window Select the ACL and click the OK button to use the selected access list. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MLD MLD Interface Settings This window is used to display and configure the Multicast Listener Discovery (MLD) interface settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > MLD > MLD Interface Settings, as shown below: Figure 6-101 MLD Interface Settings Window 284