D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 428

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Unit From Port - To Port Direction Network QoS Policy Map Name Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Select the Input direction here. This specifies to apply the policy map for ingress flow on the interface. Enter the network QoS policy map name here. This name can be up to 32 characters long. Select the None option to not associate this configuration with a network QoS policy map. Click the Apply button to accept the changes made. PFC Port Settings This window is used to display and configure the Priority-based Flow Control (PFC) port settings. NOTE: The Priority Flow Control (PFC) feature can only be enabled and used on the 10G ports. To view the following window, click QoS > QoS PFC > PFC Port Settings, as shown below: Figure 7-25 PFC Port Settings Window The fields that can be configured in PFC Port Settings are described below: Parameter Unit From Port - To Port Willing Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Select to enable or disable the willing feature here. This is used to turn on the Data Center Bridging Exchange Protocol (DCBX) PFC willing feature which indicates that the specified local port(s) is/are willing to accept PFC configurations from a remote system. Click the Apply button to accept the changes made. The fields that can be configured in Clear PFC Counters are described below: 416