D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 69
Netbios Name Server, Netbios Node Type
View all D-Link DGS-3630-52PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description entered. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Click the Back button to return to the previous window. After clicking the Configure button, the following page will appear. Figure 4-33 DHCP Server Pool Settings (Configure) Window The fields that can be configured are described below: Parameter VRF Name Boot File Domain Name Network (IP/Mask) Next Server Default Router DNS Server Netbios Name Server Netbios Node Type Description Enter the name of the VRF instance here. This can be up to 12 characters long. Enter the boot file name here. This can be up to 64 characters long. Enter the domain name for the DHCP client here. This can be up to 64 characters long. Enter the network IPv4 address and subnet mask for the DHCP client here. Enter the next server IPv4 address here. The boot image file is stored on this server and can be retrieved by DHCP clients using this IP address. The server is typically a TFTP server. Only one next server IP address can be specified. Enter the IPv4 address of the default router for the DHCP client here. Up to 8 IPv4 address can be entered here. The IP address of the router should be on the same subnet as the client's subnet. Routers are listed in the order of preference. If default routers are already configured, the default routers configured later will be added to the default interface list. Enter the IPv4 address to be used by the DHCP client as the DNS server here. Up to 8 IPv4 address can be entered here. Servers are listed in the order of preference. If DNS servers are already configured, the DNS servers configured later will be added to the DNS server list. Enter the WINS name server IPv4 address for the DHCP client here. Up to 8 IPv4 address can be entered here. Servers are listed in the order of preference. If name servers are already configured, the name server configured later will be added to the default interface list. Select the NetBIOS node type for Microsoft DHCP clients here. The node type determines the method that NetBIOS uses to register and resolve names. Options to choose from are Broadcast, Peer To Peer, Mixed, and Hybrid. A Broadcast 57