D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 371

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Neighbor Activate This window is used to view, activate and deactivate BGP neighbors. To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor Activate, as shown below: Figure 6-201 Neighbor Activate Window The fields that can be configured are described below: Parameter Address Family Description Select the address family that will be used here. Options to choose from are: • IPv4 Unicast - Specifies to activate/deactivate the BGP neighbor related to the IPv4 unicast address family. • IPv4 VRF - Specifies to activate/deactivate the BGP neighbor related to the VRF instance in the IPv4 address family. Enter the name of the VRF instance here. This name can be up to 12 characters long. Alternatively, click the Please Select button to select a pre-configured VRF instance that will be used here. • IPv4 Multicast - Specifies to activate/deactivate the BGP neighbor related to the IPv4 multicast address family. • L2VPN VPLS - Specifies to activate/deactivate the BGP neighbor related to the Layer 2 VPN VPLS address family. • IPv6 Unicast - Specifies to activate/deactivate the BGP neighbor related to the IPv6 unicast address family. • VPNv4 - Specifies to activate/deactivate the BGP neighbor related to the VPNv4 address family. Neighbor Select and enter the BGP neighbor here. Options to choose from are: • IPv4 Address - Enter the IPv4 address of the BGP neighbor here. • Peer Group - Enter the name of the peer group of the BGP neighbor here. This name can be up to 16 characters long. • IPv6 Address - Enter the IPv6 address of the BGP neighbor here. Action Select to activate or deactivate the BGP neighbor here. Options to choose from are Activate and No Activate. Click the Apply button to accept the changes made. After clicking the Please Select button, the following page will appear. Figure 6-202 Neighbor Activate (Please Select) Window 359