D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 611

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Receiver Index Owner Name Expire Time Max Datagram Size Collector Address UDP Port VRF Name Description Enter the index number of the receiver here. This number must be between 1 and 4. Enter the owner name of the receiver here. This name can be up to 32 characters long. Enter the expiration time for the entry here. The parameters of the entry will reset when the timer expired. The range is from 0 to 2000000 seconds. Selecting Infinite specifies that the entry will not expire. Enter the maximum number of data bytes of a single sFlow datagram here. The range is from 700 to 1400 bytes. By default, this value is 1400 bytes. Enter the remote sFlow collector's IPv4 or IPv6 address here. Enter the remote sFlow collector's UDP port number here. This number must be between 1 and 65535. By default, this value is 6343. Enter the name of the VRF instance here. This name can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Reset button to reset the specified entry's settings to the default settings. sFlow Sampler Settings This window is used to display and configure the sFlow sampler settings. To view the following window, click Monitoring > sFlow > sFlow Sampler Settings, as shown below: Figure 13-20 sFlow Sampler Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Instance Receiver Mode Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the instance index number if multiple samplers are associated with one interface. The valid range is from 1 to 65535. Enter the receiver index for this sampler. If not specified, the value is 0. This value must be between 1 and 4. Select the mode here. Options to choose from are Inbound and Outbound. • Selecting Inbound specifies to sample ingress packets. This is the default direction of a sampler. 599