D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 430

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 7-26 WRED Profile Window The fields that can be configured are described below: Parameter Profile Packet Type Description Enter the WRED profile ID here. The range is from 1 to 128. Select the packet type here. Options to choose from are TCP and Non-TCP. • TCP - Specifies the WRED drop parameters for the TCP packets to be set. • Non-TCP - Specifies the WRED drop parameters for non-TCP packets to be set. Packet Colour Select the packet color here. Options to choose from are Green, Yellow, and Red. • Green - Specifies the WRED drop parameters for green packets to be set. • Yellow - Specifies the WRED drop parameters for yellow packets to be set. • Red - Specifies the WRED drop parameters for red packets to be set. Min Threshold Max Threshold Max Drop Rate Enter the minimum threshold value here that will be used to start WRED dropping. The range is from 0 to 100. Enter the maximum threshold value here over which WRED will drop all packets destined for this queue. The range is from 0 to 100. Enter the maximum drop-rate value here. The range is from 0 to 14. This feature specifies the drop probability when the average queue size reaches the maximum threshold. When this value is zero, then the packet will not be dropped or remarked for ECN. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Reset Configuration button to reset the configuration on the specified entry. 418