D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 99

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 4-69 NTP Global Settings Window The fields that can be configured in NTP State are described below: Parameter NTP State Description Select to globally enable or disable the NTP feature here. Click the Apply button to accept the changes made. The fields that can be configured in NTP Authentication State are described below: Parameter NTP Authentication State Description Select to enable or disable the NTP authentication state here. When this feature is enabled, networking nodes will not synchronize with the Switch unless it carries one of the authentication keys. Click the Apply button to accept the changes made. The fields that can be configured in NTP Update Calendar are described below: Parameter NTP Update Calendar Description Select to enable or disable the NTP update calendar feature here. This is used to periodically update the hardware clock from an NTP source. Click the Apply button to accept the changes made. The fields that can be configured in NTP Settings are described below: Parameter NTP Master Stratum NTP Max Associations Description Enter the NTP master stratum value here. This is used to configure the Real-Time Clock (RTC) as an NTP master clock when an external NTP is not available. The range is from 1 to 15. Select the Default option to use the default value. Enter the NTP maximum association value here. This is used to configure the maximum number of NTP peers and clients on the Switch. The range is from 1 to 64. Click the Apply button to accept the changes made. 87