D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 386

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide ISIS Router Settings This window is used to display and configure the ISIS router settings. To view the following window, click L3 Features > ISIS > ISIS Router Settings, as shown below: Figure 6-220 ISIS Router Settings (IPv4) Window Figure 6-221 ISIS Router Settings (IPv6) Window The fields that can be configured are described below: Parameter Protocol Area Tag Adjacency Check Default Information Originate Description Select the protocol that will be used here. Options to choose from are IPv4 and IPv6. Enter the ISIS area tag here. This specifies the tag of a routing process in which the IP interface is enabled. This can be up to 16 characters long. Select to enable or disable the adjacency check feature here. ISIS performs consistency checks on hello packets and forms an adjacency only with a neighboring router that supports the same set of protocols. This is used to enable or disable the check. Select to enable or disable the default information originate feature here. If this enabled, ISIS will generate an advertisement for default routes in its Level-2 LinkState Packets (LSPs). 374