D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 623

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter TCP Port User Name Password VRF Name Source File Destination File Description selected, enter the IPv6 address of the FTP server in the space provided. Enter the TCP port number used for the FTP connection here. The range is from 1 to 65535. Enter the user name used for the FTP connection here. This name can be up to 32 characters long. Enter the password used for the FTP connection here. This password can be up to 15 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Enter the destination filename and path of the firmware file to be backed up to the FTP server here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Firmware Backup to RCP This window is used to initiate a firmware backup to an RCP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to RCP, as shown below: Figure 15-9 Firmware Backup to RCP Window The fields that can be configured are described below: Parameter Unit RCP Server IP User Name VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the RCP server IP address here. Enter the user name used for the RCP connection here. This name can be up to 32 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Enter the destination filename and path of the firmware file to be backed up to the RCP server here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. 611