D-Link DGS-3630-52PC Web UI Reference Guide 2 - Page 203

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Filter Settings, as shown below: Figure 5-83 MLD Snooping Filter Settings Window The fields that can be configured in MLD Snooping Rate Limit Settings are described below: Parameter Unit From Port - To Port Limit Number Action VID Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. This is only available if the Port option was selected as the action below. Enter the limit number here. This is to configure the rate of MLD control packets that the Switch can process on a specific interface. The range is from 1 to 1000 packets per second. Select the No Limit option to remove the limitation. Select the action that will be taken here. Options to choose from are Port and VLAN. Enter the VLAN ID here. This is the Layer 2 VLAN on a trunk port and applies the filter to packets that arrive on that VLAN. The range is from 1 to 4094. This is only available if the VLAN option was selected as the action. Click the Apply button to accept the changes made. The fields that can be configured in MLD Snooping Limit Settings are described below: Parameter Unit From Port - To Port Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. 191