D-Link DWL-8500AP Product Manual - Page 127
Commands and Syntax
UPC - 790069297212
View all D-Link DWL-8500AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
B CLI for AP Configuration 1. Start your SSH application. (We use PuTTY as an example.) 2. Enter the IP address of access point and click Open. (If your Domain Name Server is configured to map domain names to IP addresses via DHCP, you can enter the domain name of the AP instead of an IP address.) This brings up the SSH command window and establishes a connection to the access point. The login prompt is displayed. 3. When the login prompt appears, enter the username and password. The login name is admin. If you did not change the default password, press ENTER when you are prompted for a password. The default password is blank. After a successful login, the screen shows the (Access Point Name)# prompt. You are now ready to enter CLI commands at the command line prompt. Commands and Syntax The CLI for the DWL-3500AP and DWL-8500AP provides the following commands for manipulating objects: • get • set • add • remove CAUTION: Settings updated from the CLI (with get, set, add, remove commands) will not be saved to the startup configuration unless you explicitly save them via the save-running command. For a description of configurations maintained on the Commands and Syntax 127