D-Link DWL-8500AP Product Manual - Page 148

D-Link Unified Access Point Administrator's Guide Table 42 shows QOS commands. For valid values, see Table 43. For other variable values, see Table 42. QoS Commands Action Command Enable/Disable Wi-Fi Multimedia set radio wlan0 wme off set radio wlan0 wme on Get QoS Settings on the AP (AP EDCA parameters) get tx-queue Get QoS Settings on the Client Station (Station EDCA parameters) get wme-queue Set Arbitration Interframe Spaces (AIFS) on the AP set tx-queue wlan0 with queue to aifs Example: set tx-queue wlan0 with queue data0 to aifs 13 Set Arbitration Interframe Spaces (AIFS) on a client station set wme-queue wlan0 with queue to aifs Example: set wme-queue wlan0 with queue vo to aifs 14 Setting Minimum and Maximum Contention Windows (cwmin, cwmax) on the AP On the AP: set tx-queue wlan0 with queue to cwmin cwmax Example: set tx-queue wlan0 with queue data1 cwmin 15 cwmax 31 Setting Minimum and Maximum Contention Windows (cwmin, cwmax) on a client station set wme-queue wlan0 with queue to cwmin cwmax Example: set wme-queue wlan0 with queue vi cwmin 7 cwmax 15 Valid values for the "cwmin" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1024. The value for "cwmin" must be lower than the value for "cwmax". Valid values for the "cwmax" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1024. The value for "cwmax" must be higher than the value for "cwmin". Set the Maximum Burst Length (burst) on the AP set tx-queue wlan0 with queue to burst Example: set tx-queue wlan0 with queue data2 to burst 0.5 Set Transmission Opportunity Limit (txoplimit) for WMM client stations set wme-queue wlan0 with queue to txoplimit Example: set wme-queue wlan0 with queue vo to txop-limit 49 148 © 2001-2008 D-Link Corporation. All Rights Reserved.