Dell Alienware m15 R6 Service Manual - Page 17
Steps, Next steps
View all Dell Alienware m15 R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Connect the battery cable to the system board. 2. Slide the notches on the top of the base cover under the rear I/O-cover, and snap the base cover into place on the palm-rest and keyboard assembly. 3. Replace the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly. 4. Tighten the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly. 5. Tighten the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly. Next steps 1. Follow the procedure in After working inside your computer. 17
Steps
1.
Connect the battery cable to the system board.
2.
Slide the notches on the top of the base cover under the rear I/O-cover, and snap the base cover into place on the palm-rest and
keyboard assembly.
3.
Replace the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
4.
Tighten the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly.
5.
Tighten the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1.
Follow the procedure in
After working inside your computer
.
17