Dell Alienware m15 R6 Service Manual - Page 70
Power button, Removing the power button
View all Dell Alienware m15 R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Power button Removing the power button Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive or 2280 solid-state drive in SSD slot one, whichever applicable. 4. Remove the 2230 solid-state drive or 2280 solid-state drive in SSD slot two, whichever applicable. 5. Remove the I/O board. 6. Remove the memory module. 7. Remove the wireless card. 8. Remove the display assembly. 9. Remove the battery. 10. Remove the rear I/O-cover. 11. Follow the procedure from step 1 to step 16 in Removing the system board. NOTE: System board can be removed with the heat-sink assembly and USB board attached. About this task The following images indicate the location of the power button and provide a visual representation of the removal procedure. Steps 1. Remove the three screws (M2x2) that secure the power-button bracket to the palm-rest and keyboard assembly. 2. Lift the power-button bracket off the palm-rest and keyboard assembly. 3. Peel and lift the power button off the palm-rest and keyboard assembly. 70