Dell Alienware m15 R6 Service Manual - Page 45
Touchpad, Removing the touchpad
View all Dell Alienware m15 R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Steps 1. Slide the rear I/O-cover onto the palm-rest and keyboard assembly until it snaps into place. 2. Replace the two screws (M2x4) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 3. Connect the Tron light cable to the system board. 4. Replace the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 45
Steps
1.
Slide the rear I/O-cover onto the palm-rest and keyboard assembly until it snaps into place.
2.
Replace the two screws (M2x4) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
3.
Connect the Tron light cable to the system board.
4.
Replace the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Touchpad
Removing the touchpad
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
45