Dell Alienware m15 R6 Service Manual - Page 68
USB board, Removing the USB board
View all Dell Alienware m15 R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
10. Follow the procedure in After working inside your computer. USB board Removing the USB board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive or 2280 solid-state drive in SSD slot one, whichever applicable. 4. Remove the 2230 solid-state drive or 2280 solid-state drive in SSD slot two, whichever applicable. 5. Remove the I/O board. 6. Remove the memory module. 7. Remove the wireless card. 8. Remove the battery. 9. Remove the rear I/O-cover. 10. Follow the procedure from step 1 to step 16 in Removing the system board. NOTE: System board can be removed with the heat sink, I/O board, and USB board attached. About this task The following image indicates the location of the USB board and provides a visual representation of the removal procedure. Steps 1. Turn the system-board assembly over. 2. Remove the two screws (M2x4) that secure the USB board to the system board. 3. Remove the USB board off the system board. 68