Dell Alienware m15 R6 Service Manual - Page 69

Installing the USB board, Prerequisites, About this task, Steps, Next steps

Get Dell Alienware m15 R6 PDF manuals and user guides View all Dell Alienware m15 R6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Installing the USB board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the USB board and provides a visual representation of the installation procedure. Steps 1. Align the screw holes on the USB board with the screw holes on the system board. 2. Replace the two screws (M2x4) that secure the USB board to the system board. Next steps 1. Follow the procedure from step 4 to step 20 in Installing the system board. 2. Install the rear I/O cover. 3. Install the battery. 4. Install the wireless card. 5. Install the memory module. 6. Install the I/O board. 7. Install the 2230 solid-state drive or 2280 solid-state drive in SSD slot one, whichever applicable. 8. Install the 2230 solid-state drive or 2280 solid-state drive in SSD slot two, whichever applicable. 9. Install the base cover. 10. Follow the procedure in After working inside your computer. 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Installing the USB board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the USB board and provides a visual representation of the installation procedure.
Steps
1.
Align the screw holes on the USB board with the screw holes on the system board.
2.
Replace the two screws (M2x4) that secure the USB board to the system board.
Next steps
1.
Follow the procedure from step 4 to step 20 in
Installing the system board
.
2.
Install the
rear I/O cover
.
3.
Install the
battery
.
4.
Install the
wireless card
.
5.
Install the
memory module
.
6.
Install the
I/O board
.
7.
Install the
2230 solid-state drive
or
2280 solid-state drive in SSD slot one
, whichever applicable.
8.
Install the
2230 solid-state drive
or
2280 solid-state drive in SSD slot two
, whichever applicable.
9.
Install the
base cover
.
10.
Follow the procedure in
After working inside your computer
.
69