Dell Alienware m15 R6 Service Manual - Page 66
Installing the heat-sink assembly, Steps, Prerequisites, About this task
View all Dell Alienware m15 R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Steps 1. Disconnect the left and right fan cables from the system board. 2. Turn the system-board assembly over. 3. Remove the six screws (M2x4) that secure the heat-sink assembly to the system board. 4. Lift the heat-sink assembly off the system board. Installing the heat-sink assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the heat-sink assembly and provides a visual representation of the installation procedure. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. 66
Steps
1.
Disconnect the left and right fan cables from the system board.
2.
Turn the system-board assembly over.
3.
Remove the six screws (M2x4) that secure the heat-sink assembly to the system board.
4.
Lift the heat-sink assembly off the system board.
Installing the heat-sink assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the heat-sink assembly and provides a visual representation of the installation
procedure.
CAUTION: Incorrect alignment of the heat sink can damage the system board and processor.
66