Dell Alienware m15 R6 Service Manual - Page 29
Installing the 2230 solid-state drive in SSD slot two
View all Dell Alienware m15 R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Steps 1. Remove the two screws (M2x4) that secure the thermal shield to the solid-state drive and system board. 2. Lift the thermal shield off the solid-state drive. 3. Slide and lift the solid-state drive off the solid-state drive slot on the system board. Installing the 2230 solid-state drive in SSD slot two Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task NOTE: This procedure applies only to computers shipped with a 2230 solid-state drive installed in SSD slot two. NOTE: Depending on the configuration ordered, your computer may support either 2230 solid-state drive or 2280 solid-state drive in SSD slot two. If you want to replace your 2280 solid-state drive with a 2230 solid-state drive , see procedure to change the screw mount. The following image indicates the location of the 2230 solid-state drive installed in SSD slot two and provides a visual representation of the installation procedure. 29