Dell Dimension 2200 Dell Dimension 2200 Owner's Manual - Page 75
corresponding card guide at the front of the computer as you insert the, card into its connector.
View all Dell Dimension 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
7 Align the cutout on the bottom of the card with the crossbar in the system board connector. Gently rock the card into the connector until it is fully seated. If the card is full-length, insert the front end of the card into the corresponding card guide at the front of the computer as you insert the card into its connector. card card cutout card connector on system board crossbar Adding Pa rts 75
Adding Parts
75
7
Align the cutout on the bottom of the card with the crossbar in the
system board connector. Gently rock the card into the connector until
it is fully seated.
If the card is full-length, insert the front end of the card into the
corresponding card guide at the front of the computer as you insert the
card into its connector.
card cutout
card
card connector
on system board
crossbar