Dell Force10 C150 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 1154
untagged destination, range
View all Dell Force10 C150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1154 highlights
www.dell.com | support.dell.com Command History Version 8.4.1.2 Introduced on the E-Series ExaScale. Usage To reconfigure destination ports in a remote-port mirroring session as untagged ports, enter the Information untagged destination command. Related Commands untagged destination Configure destination ports to remove the reserved VLAN tag from mirrored traffic. untagged destination e x Configure destination ports for remote port mirroring so that the reserved VLAN tag is removed from mirrored traffic sent to an analyzer. Syntax untagged destination {single-interface | range interface-range} Parameters single-interface range interface-range Specifies one of the following interface types: • 1-Gigabit Ethernet: Enter gigabitethernet slot/port. • 10-Gigabit Ethernet: Enter tengigabitethernet slot/port. Specifies one of the following interface ranges: • gigabitethernet slot/first_port - last_port • tengigabitethernet slot/first_port - last_port A space is required before and after the dash (-). For example: untagged destination range gigabitethernet 1/2 - 4 Defaults Destination ports send untagged packets to an analyzer so that the reserved VLAN ID is removed and the original monitored packet is mirrored. Command Modes MONITOR SESSION (conf-mon-sess-session-ID) Command History Version 8.4.1.2 Introduced on the E-Series ExaScale. Usage To configure destination ports in a remote-port mirroring session as tagged ports, enter the tagged Information destination command. Related Commands tagged destination Configure destination ports to add the reserved VLAN tag to mirrored traffic. 1154 | Port Monitoring