Dell Force10 C150 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 1522

www.dell.com | support.dell.com Command History Example H Version 7.5.1.0 Introduction Figure 64-15. show cpu-traffic-stats linecard Command Example FTOS#show cpu-traffic-stats linecard all Stats for Line card 2, Port pipe 0, Port 0 Numbers of packets trapped due to Egress MTU violation : 1 Numbers of packets trapped due to TTL 1 or IP Options : 0 Numbers of packets trapped due to TTL 0 : 0 Usage The statistics are displayed only if at least one of the counters is non-zero for any linecard, Port-Pipe, Information or port combination. show hardware linecard fpga c Display internal information about the line card FPGA. Syntax show hardware linecard slot fpga {errorlog | registers | stats} Parameters slot errorlog registers stats Enter the line card slot number. Range: 0 to 7 (OPTIONAL) Enter the keyword errorlog to dump the FPGA Error Log. (OPTIONAL) Enter the keyword registers to dump the FPGA Registers. (OPTIONAL) Enter the keyword stats to dump the FPGA Interrupt Statistics. Defaults No default behavior or values Command Modes EXEC EXEC Privilege Command History Version 7.5.1.0 Introduced Usage Information Warning: Use this command only when you are working directly with a technical support representative to troubleshoot a problem. Do not use this command unless a technical support representative instructs you to do so. show hardware rpm fpga c Display internal RPM FPGA information. Syntax show hardware rpm slot fpga {errorlog | linecard {slot registers} | registers | stats | standby-rpm registers} 1522 | C-Series Diagnostics and Debugging