Dell Force10 C150 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 54

www.dell.com | support.dell.com linecard number rpm repair booted file-url Enter the keyword rpm to upgrade the system image of a selector image on all processors on the RPM. Enter this keyword to upgrade a line card newly inserted into an already upgraded chassis. This option is only available with the system-image keyword. Upgrade the bootflash or bootselector image using the currently running FTOS image. Enter the following location keywords and information to upgrade using an FTOS image other than the one currently running: • To specify an FTOS image on the internal flash, enter flash:// file-path/filename. • To specify an FTOS image on an FTP server, enter ftp:// user:password@hostip/filepath • To specify an FTOS image on the external flash on the primary RPM, slot0://file-path/filename • To copy a file on a TFTP server, enter tftp://hostip/filepath/ filename Defaults FTOS uses the boot flash image that was packed with it if no URL is specified. Command Modes EXEC Privilege Command History Version 7.7.1.0 Introduced system-image option Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage A system message appears stating the Bootflash upgrade status. Reload the system to boot from the Information upgraded boot images. Once the URL is specified, the same downloaded image can be used for upgrading an individual RPM, line cards, SFM FPGA, and system-image for cache-boot without specifying the file-url again using the command upgrade {bootflash-image | bootselector-image | system-image} {all | linecard linecard-slot | rpm}. After 20 minutes, the cached memory is released and returned for general use, but the URL is maintained and you do not have to specify it for subsequent upgrades. Related Commands upgrade fpga-image boot system Upgrade the FPGA version in the specified E-Series SFM. Display configured boot image information 54 | File Management