Dell Force10 C150 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 387

detail summary (OPTIONAL) Enter the keyword detail to view detailed status information of the peers in that peer group. (OPTIONAL) Enter the keyword summary to view status information of the peers in that peer group. The output is the same as that found in show ip bgp summary command Command Modes Example EXEC EXEC Privilege Figure 12-24. Command Example: show ip bgp peer-group (Partial) #show ip bgp peer-group Peer-group RT-PEERS Description: ***peering-with-RT*** BGP version 4 Minimum time between advertisement runs is 30 seconds For address family: IPv4 Unicast BGP neighbor is RT-PEERS Number of peers in this group 20 Peer-group members (* - outbound optimized): 12.1.1.2* 12.1.1.3* 12.1.1.4* 12.1.1.5* 12.1.1.6* 12.2.1.2* 12.2.1.3* 12.2.1.4* 12.2.1.5* 12.2.1.6* 12.3.1.2* 12.3.1.3* 12.3.1.4* 12.3.1.5* 12.3.1.6* 12.4.1.2* 12.4.1.3* 12.4.1.4* 12.4.1.5* 12.4.1.6* Table 12-14. Command Example fields: show ip bgp peer-group Line beginning with Peer-group Administratively shut BGP version Minimum time For address family BGP neighbor Number of peers Peer-group members: Description Displays the peer group's name. Displays the peer group's status if the peer group is not enabled. If the peer group is enabled, this line is not displayed. Displays the BGP version supported. Displays the time interval between BGP advertisements. Displays IPv4 Unicast as the address family. Displays the name of the BGP neighbor. Displays the number of peers currently configured for this peer group. Lists the IP addresses of the peers in the peer group. If the address is outbound optimized, a * is displayed next to the IP address. Border Gateway Protocol IPv4 (BGPv4) | 387