Dell Force10 C150 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 717

Command History Version 8.4.1.0 Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Support added on the management Ethernet port. Introduced on E-Series ExaScale Introduced on C-Series and S-Series Introduced on E-Series TeraScale Example Figure 26-1. Command Example: ipv6 address FTOS(conf)#interface gigabitethernet 10/0 FTOS(conf-if-gi-10/0)#ipv6 address ? X:X:X:X::X IPv6 address FTOS(conf-if-gi-10/0)#ipv6 address 2002:1:2::3 ? Prefix length in bits FTOS(conf-if-gi-10/0)#ipv6 address 2002:1:2::3 /96 ? FTOS(conf-if-gi-10/0)#ipv6 address 2002:1:2::3 /96 FTOS(conf-if-gi-10/0)#show config ! interface GigabitEthernet 10/0 no ip address ipv6 address 2002:1:2::3 /96 no shutdown FTOS(conf-if-gi-10/0)# Usage Information FTOS allows multiple IPv6 addresses to be configured on an interface. When the no ipv6 address command is issued without specifying a particular IPv6 address, all IPv6 addresses on that interface are deleted. ipv6 name-server c e s Enter up to 6 IPv6 addresses of name servers. The order you enter the addresses determines the order of their use. Syntax ipv6 name-server ipv6-address [ipv6-address2...ipv6-address6] Parameters ipv6-address ipv6-address2... ipv6-address6 Enter the IPv6 address (X:X:X:X::X) of the name server to be used. Enter up five more IP addresses, in dotted decimal format, of name servers to be used. Separate the addresses with a space. Defaults No name servers are configured. Command Modes CONFIGURATION Command History Version 8.4.2.1 Version 8.4.1.0 Introduced on the C-Series and S-Series Introduced on E-Series TeraScale Usage You can separately configure both IPv4 and IPv6 domain name servers. Information IPv6 Basics | 717