Dell Inspiron 16 5640 Owners Manual - Page 66
I/O board, Removing the I/O board
View all Dell Inspiron 16 5640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
About this task The following image indicates the location of the I/O-board cable and provides a visual representation of the installation procedure. Figure 39. Installing the I/O-board cable Steps 1. Connect the I/O-board cable to the connector on the I/O board and press down the cable-connector latch to secure the cable in place. 2. Connect the I/O-board cable to the connector (IO) on the system board and press down the cable-connector latch to secure the cable in place. Next steps 1. Install the fan. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. I/O board Removing the I/O board CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following images indicate the location of the I/O board and provide a visual representation of the removal procedure. 66 Removing and installing Field Replaceable Units (FRUs)