Dell Inspiron 16 5640 Owners Manual - Page 81
System board, Removing the system board
View all Dell Inspiron 16 5640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
About this task The following images indicate the location of the power-adapter port and provide a visual representation of the installation procedure. Figure 55. Installing the power-adapter port Steps 1. Align and place the power-adapter port in the slot on the palm-rest and keyboard assembly. 2. Route the power-adapter port cable through the guide on the palm-rest and keyboard assembly. 3. Connect the power-adapter port cable to the connector (DCIN) on the system board. 4. Close the right-display hinge downwards to align the screw holes on the right-display hinge to the screw holes on the system board and the palm-rest and keyboard assembly. 5. Replace the two (M2.5x5) screws to secure the right-display hinge to the system board and the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. System board Removing the system board CAUTION: The information in this section is intended for authorized service technicians only. Removing and installing Field Replaceable Units (FRUs) 81