Dell Inspiron 16 5640 Owners Manual - Page 74

Power button, Removing the power button

Get Dell Inspiron 16 5640 PDF manuals and user guides View all Dell Inspiron 16 5640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

NOTE: The power-adapter port is secured in place by the right-display hinge. There is no screw, tape, or adhesives securing the power-adapter port to the palm-rest. Therefore, it is important to verify that the power-adapter port has not been displaced during service. 3. Gently press to lower the hinges and align the screw holes on the hinges with the screw holes on the palm-rest and keyboard assembly. 4. Replace the five (M2.5x5) screws to secure the left and right-display hinges to the palm-rest and keyboard assembly. 5. Connect the display cable to the connector (eDP) on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Power button Removing the power button CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the I/O board. About this task The following image indicates the location of the power button and provides a visual representation of the removal procedure. 74 Removing and installing Field Replaceable Units (FRUs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
NOTE:
The power-adapter port is secured in place by the right-display hinge. There is no screw, tape, or adhesives
securing the power-adapter port to the palm-rest. Therefore, it is important to verify that the power-adapter port has
not been displaced during service.
3.
Gently press to lower the hinges and align the screw holes on the hinges with the screw holes on the palm-rest and
keyboard assembly.
4.
Replace the five (M2.5x5) screws to secure the left and right-display hinges to the palm-rest and keyboard assembly.
5.
Connect the display cable to the connector (eDP) on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Power button
Removing the power button
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
I/O board
.
About this task
The following image indicates the location of the power button and provides a visual representation of the removal procedure.
74
Removing and installing Field Replaceable Units (FRUs)