Dell Inspiron 16 5640 Owners Manual - Page 82
Prerequisites, About this task, Memory x2 DIMM A DDR5 ONLY + DIMM B DDR5 ONLY connector
View all Dell Inspiron 16 5640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the memory module. 4. Remove the solid-state drive. 5. Remove the wireless card. 6. Remove the display assembly. 7. Remove the heat sink - for computers shipped with an integrated graphics card or heat sink - for computers shipped with a discrete graphics card, whichever is applicable. NOTE: When removing the system board to replace or access other parts, the system board can be removed with the heat sink attached to it in order to simplify the procedure and preserve the thermal bond between the system board and heat sink. About this task The following image indicates the connectors on your system board. Figure 56. System board connectors 1. I/O-board cable (IO) connector 2. Wireless card (WLAN) connector 3. Display cable (eDP) connector 4. Power-adapter port (DCIN) connector 5. Memory x2 (DIMM A DDR5 ONLY + DIMM B DDR5 ONLY) connector 6. Keyboard cable (KB) connector 7. Keyboard-backlight cable (BL) connector 8. Battery cable (BATT) connector 9. Touchpad cable (TP) connector 10. Fan cable (FAN) connector 11. Speaker cable (SPK) connector 82 Removing and installing Field Replaceable Units (FRUs)