Dell Latitude XT2 XFR Service Manual - Page 45
Installing the Palm Rest
View all Dell Latitude XT2 XFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Dell™ Latitude™ XT2 XFR Service Manual 15. Remove the palm rest from the XT2 XFR. 4.9.2 Installing the Palm Rest 1. Insert the cable clamp over the LCD cables and secure with the cable clamp to base screws. CAUTION: Make sure the cable clamp is set properly over the cable gasket and the cable gasket is secure before proceeding. Failure to perform this step properly could cause an inlet for moisture into the system. 2. Set the palm rest onto the right side and tilt the palm rest up connect the USB Hub board to system board cable (ribbon cable). Then connect the LCD to USB Hub board cable. Page 45 of 94 Version A00-01
Dell
™
Latitude™ XT2 XFR Service Manual
Page 45 of 94
Version A00-01
15.
Remove the palm rest from the XT2 XFR.
4.9.2
Installing the Palm Rest
1.
Insert the cable clamp over the LCD cables and secure with the cable clamp to base screws.
CAUTION:
Make sure the cable clamp is set properly over the cable gasket and the
cable gasket is secure before proceeding.
Failure to perform this step properly could
cause an inlet for moisture into the system.
2.
Set the palm rest onto the right side and tilt the palm rest up connect the USB Hub board to
system board cable (ribbon cable).
Then connect the LCD to USB Hub board cable.