Dell OptiPlex GX260 Troubleshooting Guide - Page 13

Memory allocation error

Page 13 highlights

Solving Problems: Dell OptiPlex GX260 Systems User's Guide Hard-disk controller failure- The hard drive failed initialization. ● Run the Dell Diagnostics. ● See "Drive Problems" for troubleshooting suggestions. Hard-disk drive failure- The hard drive failed initialization. ● Run the Dell Diagnostics. ● See "Drive Problems" for troubleshooting suggestions. Hard-disk drive read failure- The hard drive failed initialization. ● Run the Dell Diagnostics. ● See "Drive Problems" for troubleshooting suggestions. Invalid configuration information - please run SETUP program- The computer configuration information does not match the hardware configuration. Enter system setup and correct the computer configuration information. Keyboard failure- A cable or connector may be loose, or the keyboard or keyboard/ mouse controller may be faulty. See "Keyboard Problems." Memory address line failure at address, read value expecting value- A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. See "Memory Problems" for additional troubleshooting suggestions. Memory allocation error- The software you are attempting to run is conflicting with the operating system, another program, or a utility. 1. Turn off the computer, wait 30 seconds, and then restart the computer. 2. Try to run the program again. 3. If the error message still appears, see the software documentation for additional troubleshooting suggestions. Memory data line failure at address, read value expecting value- A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. See "Memory Problems" for additional troubleshooting suggestions. Memory double word logic failure at address, read value expecting value- A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. See "Memory Problems" for additional troubleshooting suggestions. http://support.dell.com/support/edocs/systems/opgx260/en/ug/solvprob.htm (13 of 30) [10/25/2007 1:44:24 PM]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Solving Problems: Dell OptiPlex GX260 Systems User's Guide
Hard-disk controller failure
The hard drive failed initialization.
Run the
Dell Diagnostics
.
See "
Drive Problems
" for troubleshooting suggestions.
Hard-disk drive failure
The hard drive failed initialization.
Run the
Dell Diagnostics
.
See "
Drive Problems
" for troubleshooting suggestions.
Hard-disk drive read failure
The hard drive failed initialization.
Run the
Dell Diagnostics
.
See "
Drive Problems
" for troubleshooting suggestions.
Invalid configuration information - please run SETUP program
The computer
configuration information does not match the hardware configuration.
Enter system setup
and correct the computer configuration information.
Keyboard failure
A cable or connector may be loose, or the keyboard or keyboard/
mouse controller may be faulty. See "
Keyboard Problems
."
Memory address line failure at
address
, read
value
expecting
value
A memory
module may be faulty or improperly seated. Reinstall the memory modules and, if
necessary, replace them. See "
Memory Problems
" for additional troubleshooting
suggestions.
Memory allocation error
The software you are attempting to run is conflicting with the
operating system, another program, or a utility.
1.
Turn off the computer, wait 30 seconds, and then restart the computer.
2.
Try to run the program again.
3.
If the error message still appears, see the software documentation for additional
troubleshooting suggestions.
Memory data line failure at
address
, read
value
expecting
value
A memory
module may be faulty or improperly seated. Reinstall the memory modules and, if
necessary, replace them. See "
Memory Problems
" for additional troubleshooting
suggestions.
Memory double word logic failure at
address
, read
value
expecting
value
A
memory module may be faulty or improperly seated. Reinstall the memory modules and,
if necessary, replace them. See "
Memory Problems
" for additional troubleshooting
suggestions.