Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 1092

• metric-value - The metric (or preference) value of the default route. (Range: 1-16777214) Default Configuration This command has no default configuration. Command Mode Router OSPF Configuration mode. User Guidelines This command has no user guidelines. Example The following example sets a value of 50 for the default metric. console(config-router)#default-metric 50 distance ospf The distance ospf command sets the preference values of OSPF route types in the router. Lower route preference values are preferred when determining the best route. The type of OSPF route can be intra, inter, external. All the external type routes are given the same preference value. Use the no form of this command to reset the preference values to the default. Syntax distance ospf {[intra-area dist1] [inter-area dist2] [external dist3]} no distance ospf { intra-area | inter-area | external } Syntax Description Parameter intra-area dist1 Description Used to select the best path within an area when there are two or more routes to the same destination from two different routing protocols (Range: 1-255). 1092 OSPF Commands