Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 1399

passwords min-length Use the passwords min-length command in Global Configuration mode to enforce a minimum length password length for local users. The value also applies to the enable password. The valid range is 8-64. The default is 8. Use the no version of this command to set the minimum password length to 8. Syntax passwords min-length length no passwords min-length • length - The minimum length of the password (Range: 8-64 characters) Default Configuration By default, the minimum password length is 8 characters. Command Mode Global Configuration mode User Guidelines This command has no user guidelines. Example The following example configures user bob with password xxxyymmmm and user level 15. (config)# username bob password xxxyyymmm level 15 passwords strength-check Use the passwords strength-check command in Global Configuration mode to enable the Password Strength feature. The command is used to enable the checking of password strength during user configuration. Use the no form of the command to disable the Password Strength feature. Syntax passwords strength-check Password Management Commands 1395