Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 178

Table 2-5. Navigating CLI Command Modes Command Mode Access Method Command Prompt User EXEC The user is automatically in User EXEC mode unless the user is defined as a privileged user. console> Privileged EXEC Use the enable console# command to enter into this mode. This mode is password protected. Global Configuration From Privileged EXEC mode, use the configure command. console(config)# Line Interface From Global Configuration mode, use the line command. console(config-line)# Management Access-List From Global Configuration mode, use the management access-list command. console(config-macal)# Exit or Access Previous Mode logout Use the exit command, or press + to return to the User EXEC mode. Use the exit command, or press + to return to the Privileged EXEC mode. To exit to Global Configuration mode, use the exit command, or press + to Privileged EXEC mode. To exit to Global Configuration mode, use the exit command, or press + to Privileged EXEC mode. 178 Using the CLI